Homag VME Interface f HC010 Rev. 04 Item no. 2-083-01-5093
One-off item · available only once
We pack your order on the day you place it. The carrier collects it on the next working day.
- Germany
- 2–3 working days
- EU
- 3–5 working days
- Worldwide
- on request
Secure payment
You choose your payment method at checkout.
No PayPal account? Via the cart you can also pay by credit card or with any of the other methods shown.
Your payment data is processed in encrypted form. We do not store any credit card data.
HOMAG INTERFACE VME HC010 LWL REV4 OS9-INTERR – Item number 2-083-01-5093
Item number: 2-083-01-5093 (according to label on the board)
Description: HOMAG INTERFACE VME HC010 LWL REV4 OS9-INTERR
Product ID: R2083015093
Description:
This module is an original VME interface card for HOMAG control systems, specifically for the HC010 model in Revision 4. It was developed by HOMAG, and the module was presumably manufactured by Homatic. The card is designed for fiber optic communication (LWL TX/RX on the front panel) and is equipped with an extensive chipset and diagnostic LEDs on the front.
On the front panel, there is a 24V connection, a coding switch (SW3), various jumpers (JP5–JP7), optical transmit and receive ports (LWL), and diagnostic LEDs for AEN, SEL, SPS, IRQ1–IRQ3, D0, D1.
The circuit board bears the inscription "VME INTERFACE HC010 REV. 4 HOMATIC" on the component side and on the solder side.
Technical Details:
-
Processor: STMicroelectronics TS68230CP10 – a parallel interface adapter
-
EPROMs:
-
U9.5: 3-012-05-1670
-
U19.4: 3-012-05-1660
-
-
ASIC module: P9924A M74HC573C1 – Octal D-Type Latch
-
Optocoupler: TQY 4 4A
-
Relays: 2x TQ7X1-5V (Japan)
-
Backup battery: ACCU 3.6V, item number 4-084-03-0008
-
Further ICs:
-
NEC D71054C – Multifunction Timer
-
M5M5256DP – SRAM
-
MAX690EPA – Supervisor IC
-
Various 74HCxxx logic ICs
-
-
Quartz: 32.000 MHz DIL (HXO-14C)
Scope of delivery:
The VME interface card is supplied as shown in the photos and described. The card was removed from a running system. The technical condition is visually flawless, and it was considered operational until its removal.
Note:
This is a used part that was removed from a running HOMAG system. The card shows no visible damage and is in very good condition.
Highlights:
-
HOMAG VME Interface for HC010 Rev4 control with fiber optic communication
-
Extensive IC assembly including ST TS68230, MAX690, NEC D71054, SRAM and EPROMs
-
Excellent optical condition, removed from a running system
-
Condition
-
Manufacturer Part No.
-
Product Category
-
Manufacturer
-
Weight









